A lot of plastic products will be used in survival. There are certain requirements for the rigidity and toughness of plastic products. For example, the fresh-keeping film used at ordinary times should have a certain degree of toughness, so that it is not easy to tear. If the toughness is not enough, the customer will certainly not buy it. This requires the use of nucleating transparent agent, but how to use it correctly? Let me introduce to you:

1. Prepare 100kg plastic granules.
2. According to the weight of plastic particles, the weight of nucleating transparent agent that should be added to 100kg of plastic particles (100kg, that is, 200g of blowing film whitening agent) is calculated according to the addition ratio of two thousandths. Some manufacturers do not add enough to save costs and achieve the effect of antireflection
3 Add the weighed nucleating transparent agent and plastic particles into the mixer and stir for 5-10 minutes to make them fully and evenly mixed. Uneven mixing will lead to uneven transparency. Pay special attention here!
4 The evenly mixed raw materials can be produced and processed according to the normal production process by entering the film blowing production machine. After the finished products are produced, the brightness and toughness of the nucleating transparent agent before and after the addition of nucleating transparent agent are compared. The decomposition temperature of the nucleating transparent agent is 240 ℃, and the nucleating agent does not play a role if the processing temperature is too high.